Level 2 Electrician St George
ASP Level 2 Electrician - 24/7 Service
$0 Call Out Fee & FREE Quotes
Level 2 Defect Report Rectification
Consumer Mains Repairs
Point Of Attachment Replacement
3 Phase Electricity Upgrades
Switchboard Upgrades
Get a Quote
Accredited Level 2 Electricians St George
Have you received a Defect Notice and need a Level 2 Electrician in St George to make repairs? Book Online or Call 0420 522 296 for a Free quote.
TL Electricians St George are qualified ASP Level 2 Electricians servicing St George NSW & Sydney. We are an Accredited Service Provider licensed to work on all level 2 electrician projects in Sydney including Switchboards, Consumer Mains, Point of Attachments (POA) & Private Poles. For any level 2 electrician Sydney emergencies, we provide 24/7 service and can rapidly response to any after hours level 2 emergencies.
We get the basics right – we turn up when we say we will, provide affordable fixed prices, use premium brands & fix it properly the first time. Need proof? We are local business award finalists & hold over 75+ 5 Star review ratings making us the best Level 2 Electrician in the St George area.
$0 Call Out & FREE Quotes
FREE in-home quotes & NO Call Out Fee for St George electrician services during normal business hours
24hr Emergency & Same Day Service
No matter what time of day or night, we are available 24hrs to respond to your after hours electrical emergency in St George
Level 2 Qualified, Licensed & Insured
Our professional St George Level 2 Electricians are fully Qualified, Licensed & Insured to work on both Residential & Commercial properties
ASP Level 2 Defect Notice Repairs
A Defect Notice is a rectification order issued to a homeowner for electrical equipment being incompliant with the Service and Installation Rules 2018. Defect Reports are issued by electricity distributors. These include Ausgrid, Endeavor Energy, Vector Energy, Transgrid & Essential Energy. The reports give homeowners 21 days to contact an Electrician to rectify the issues or power may be disconnected.
The Report is titled: “Customer Installation / Private Mains Defect Report”. Only qualified Level 2 Electricians like TL Electricians St George are able to rectify Level 2 Defect Notices. Once repairs are made, we lodge a NOSW report to clear the Defect and prevent the electrical distributor from disconnecting the homes power.
Common Level 2 Defect Notice Reasons:
- Private overhead/underground cables are damaged/deteriorated
- Point of Attachment where Ausgrids overhead service line attaches is damaged, does not have the required minimum ground clearance, or does not have satisfactory access & requires repair
- Defective mains box & consumer mains
- Power pole is damaged
- Electrical service is damaged or unserviceable,
- Overhead cable does not have the required ground clearance of 3 meters,
- The Crossarm on the private pole is damaged or unserviceable,
- Private overhead lines do not have the minimum safety clearance to ground and require retentioning,
- Ausgrids overhead or underground service cable has been damaged and requires replacing
- Tree’s adjacent to the private overhead lines do not have required clearance,
- Defective or missing equipment,
- Missing Service Fuses / No Service Fuses
- Broken point of attachments which are hanging off a roof,
- Old switchboards with porcelain fuses, old or missing service fuses, and asbestos panels,
Please contact us or call 0420 522 296 for a FREE quote!
Consumer Mains Repair - Level 2 Electrician Sydney
The Consumer Mains in your home are the main electrical wires which connect from the Point of Attachment on the roof of your home, to the service fuses in your switchboard. Consumer mains are important as they supply all of your house with electricity. If your home was built prior to 1980, the common electrical standard for consumer main cable size was typically 4mm. By modern standard this is very undersized and not adequate for modern day appliances including air conditioning, home theatres, pool pumps etc. The modern standard according to AS/NZ3000 Wiring Rules is a minimum thickness of 16mm XLPE Cable.
If you are renovating your home or introducing more appliances which is increasing your electrical load, we strongly suggest upgrading your consumer mains to a minimum thickness of 16mm. Undersized consumer main cables are a leading cause of burning cables and electrical fires.
As Level 2 Electrician St George we respond to jobs where a Defect Notice has been issued for broken Consumer mains & broken mains box, Consumer mains and the main neutral at your Point of attachment can become sun and UV damaged over time and the outer protective sheath can deteriorate which exposes the bare copper. This can then contact your metal guttering and create sparking. In these cases TL Electricians St George can upgrade your consumer mains to 16mm XLPE Cable.
Call 0420 522 296 for St George Level 2 Electrican
Switchboard Upgrades & Repairs In St George
The switchboard & meter wiring is a very important part of your home electrics. Electricity comes in from the street electricity network and is then routed to your home via your electricity meters in your switchboard. If your home was constructed before 1980, your switchboard may still contain circuit breakers or porcelain ceramic fuses. These are the most common cause of house fires. Today, all new homes must have RCD Safety switches installed. This provides important protection to homeowners from electrocutions and wiring overloading.
If you do not have RCD Safety Switches installed, we recommend a full Switchboard Upgrade including Meter Wiring by a Level 2 Electrician. As part of a Switchboard Upgrade, our Level 2 Electricians at TL Electricians St George, remove your existing asbestos panel, porcelain ceramic fuses and replace them with individual RCD Safety Switches on a fireproof Bakelite panel.
TL Electricians St George can provide you with a Free Quote to Upgrade from a Fuse Box to a Switchboard. You should upgrade your Switchboard if you are experiencing any of the following:
- You require a Meter box relocation
- You have porcelain ceramic fuses
- You have Circuit Breakers
- Persistent tripping of a Circuit Breaker or shared RCD
- Persistent tripping Main Switch
- Electrical wires burned without safety cut off
- Electrical wires deteriorated and coming into contact with something
- Water damaged equipment
- Faulty electrical equipment
In a switchboard electrical emergency we strongly recommend calling our Level 2 switchboard Electrician on 0420 522 296 for immediate service.
3 Phase Electricity Upgrade In St George
If you home is setup for 1 phase, it means that you have 1 cable feeding your home for all the electricity requirements. Think of the supply like a water pipe – the one cable has only a certain capacity which is 63amps. If you exceed this, you are requesting more electricity than what your cabling is capable of and may cause the cable to start to burn. Similar to the concept of 1 phase power, 3 phase power is 3 separate 63amp cables coming into your home. Therefore, allowing you to spread load requirements evenly over the cables you have.
If you are a high electricity user, you can balance the electricity load in your home and not put your homes electrical system under excessive loads which lead to cable burning and fires. Some appliances require connection to a three-phase supply and cable so the device can get a consistent and uninterrupted power delivery. A Level 2 electrician in St George from TL Electricians St George will help you out.
Top reasons people upgrade from single phase to three phase power:
- Installing an electric car charger – most new electric car chargers require three phase power in order to install a level 2 fast charger
- Installing an air conditioner
- Installing solar panels
- Factories installing new industrial machines
- High electricity load homes
Contact Us For FREE Quotes Today
Point of Attachment (POA)
Your Point of Attachment or POA as it is commonly referred is the metal bracket on the eve or roof of your home which holds your aerial mains cables. Point of Attachment brackets can be single leg or double leg construction and mounted to either the facia or rafter of your roof. It is important to ensure your Point of Attachment bracket is made of galvanised steel and mounted solidly. They must take the weight of your aluminium aerial cables. Over time, brackets can either rust or move causing aeriel cables to sag which creates a danger.
As Level 2 Electricians in St George, we attend many Level 2 emergency jobs to replace Point of Attachment brackets which have been defected. The minimum legal height of a point of attachment bracket is 3 meters from the ground. When measuring the height, we choose the lowest point of the cables, include any raised decks where wires travel over.
Private Pole Installation - Level 2 Electrician Sydney
Your Private Pole is the pole at the front of your home which connects & holds the aerial mains cables from the street electricity grid which feeds your home. Private Poles are the responsibility of the home owner and can be defected if not compliant with the latest service & installation rules 2018. Common defects include rusted poles and poles made from wood which have rotted. New private poles are made from galvanized steel.
At TL Electricians St George, our Level 2 Electricians specialize in Private Pole Installation. We offer expert consultation, customized solutions, and ensure compliance with regulations. Using high-quality materials, we efficiently install private poles with a focus on safety. Our thorough testing and ongoing support guarantee reliable and long-lasting results for your property’s electrical needs. Choose us for a seamless and efficient Private Pole Installation experience. Please contact us for a FREE quote on replacing your private pole or installing a new private pole in Sydney.
For Private Pole Replacement and Installation
Call 0420 522 296
Service Fuse Repair In St George
Council Service Fuses are a small black cartridge which is an isolation point between your consumer mains and switchboard. If the Service Fuses are removed or blow, the flow of electricity to your home will stop and cause a power outage. Service Fuses are commonly 80amps and can blow in the event you are overloading your home electrics. If a Service Fuse requires replacement, only qualified Level 2 Electricians can make the repairs. TL Electricians St George are qualified Level 2 Electricians and can repair your Service Fuse.
MPD - Meter Protection Devices - Level 2 Electrician Sydney
MPD installation is a shortened name for the installation of a Meter Protection Device to your residential or commercial properties switchboard. An MPD is essentially a service fuse which is installed in your switchboard or fuse box and acts as an isolation point to protect the meter in the event that there is an electrical issue or short circuit. An MPD must be installed to each meter, therefore typical setups require multiple MPD’s to installed. The installation of MPD’s must be completed by a level 2 electrician in the St George area.
